Author Topic: DUDEWORLD T's  (Read 8539 times)

0 Members and 1 Guest are viewing this topic.

3ncryptd

  • Guest
DUDEWORLD T's
« on: February 21, 2007, 09:10:05 PM »
Dudes & Dudettes get yourself into the greatest Tshirt known to man, a DUDEWORLD T. :)

Spread the word of Knuck buy getting yourself into 1 of these excellent tops.

If you dont know what Im on about, check out this thread with the tops in question being modeled by The Dude himself.

[size=14]Check out the T-Shirts here![/size]

Orders now being taken. :)

Ive set out a nice easy format below. It'll save me getting any1s orders confused and screwed up, hopefully.  ;)

 
-----------------------
       STYLE            
(Short,3/4,Long Sleeve)
-----------------------
       SIZE                
-----------------
    PRINTING                
(Front & Back/Front Only/Back With Dusters/Back Without Dusters)
-----------------                                                                              
 Amount  
Required      
--------
Total $
--------

Eg:  Short sleeve, Large, Both, 2, $36
     Long sleeve, XLarge, Front, 1, $26
     3/4 Sleeve, Large, Both, 1, $22

SIZES
-----
ADULT
-----
Small - To fit chest 108cm
Medium - To fit chest 112cm
Large - To fit chest 116cm
XLarge - To fit chest 120cm
XXLarge - To fit chest 124cm

Womens T's or singlet tops are also available at the same $ as mens T's.
(The womens T's have a slightly more fitting cut to them.)

Big Thanx to Whiteglove for the following to make it even easier to determine your size. :)

The easiest way to determine your size:
 
            Get your most comfortable Tshirt
 
            Lay it on a flat surface
 
            With a tape measure or ruler measure the distance across the chest - just below the armholes
 
            Then double it - this is your chest measurement  - if you are in between sizes it is better to  
            get the bigger size as cotton can shrink.
 
            If length is an issue do the same from shoulder seam to hem (don't double it)
 
            Sleeve length can be determined the same way.

----
KIDS
----
6 - To fit chest 88cm
8 - To fit chest 92cm
10 - To fit chest 96cm
12 - To fir chest 100cm
14 - To fit chest 104cm

These sizes should cover almost all bases but if you need another size please ask.
    
PRICES
------
Short sleeve - $18
3/4 Sleeve - $22
Long Sleeve - $26

Postage will obviously vary due to your location. Please include your Postcode and prefered postage method
ie: Registered, Standard, Express etc if you have one. If no preference given I'll send them in a standard Oz post satchel.
Direct Deposit details and postage cost will be PMed to you when your shirts are ready to be sent.
Once payment is cleared shirts will be posted ASAP.

Any other questions, post em here and I'll try and be helpful.  ;)
« Last Edit: February 23, 2007, 03:28:53 PM by 3ncryptd »

admin

  • Guest
Re: DUDEWORLD T's
« Reply #1 on: February 21, 2007, 09:21:22 PM »


Shit hot man!!


Oh, can you do 140cm jobs?  I've got a really big mate you see .. (he's in episode9) .. promised him a shirt when I put in an order.



(just gimme a few weeks to rustle up some cashola for a decent sized order ... burned the last lot on stateside serverspace, rofl)

LogicprObe

  • Guest
Re: DUDEWORLD T's
« Reply #2 on: February 21, 2007, 09:32:28 PM »
I see the chest sizes there...but what about the gut sizes?

And where are models for the womens' singlets?
« Last Edit: February 21, 2007, 09:34:51 PM by LogicprObe »

3ncryptd

  • Guest
Re: DUDEWORLD T's
« Reply #3 on: February 21, 2007, 09:34:51 PM »
Oh, can you do 140cm jobs?

No sweat. :)

Is he a tall fella or vertically challenged? lol

Dont wanna make it to long so he looks like he's wearing a Dudeworld dress or to short like a Dudeworld boob tube lmao.

If he could give you his shoulder to hip measurements we'll be able to knock 1 up no wukkers. :)

3ncryptd

  • Guest
Re: DUDEWORLD T's
« Reply #4 on: February 21, 2007, 09:39:27 PM »
Quote
I see the chest sizes there...but what about the gut sizes?

And where are models for the womens' singlets?

Unless youve got an especially big tummy you should be right with going off the chest sizes.

If your worried bout it lemme know your gut size and I'll go from that. :)

Oh and the modeling of the womens singlets, I didnt think Richo was hot enuff so he only got the guys stuff to show off. ;)

Lancer

  • Guest
Re: DUDEWORLD T's
« Reply #5 on: February 21, 2007, 09:40:34 PM »
Short sleeve, Large, Front, 1, $18
Short sleeve, Large, Both, 1, $18 (no knuckle duster)
Long sleeve, Large, Front, 1, $26
3/4 Sleeve, Large, Both, 1, $22
3/4 Sleeve, Large, Both, 1, $22 (no knuckle duster)
Total Ammount owing: $96

« Last Edit: February 23, 2007, 03:29:42 PM by Lancer »

LogicprObe

  • Guest
Re: DUDEWORLD T's
« Reply #6 on: February 21, 2007, 09:53:43 PM »
Quote
Quote
I see the chest sizes there...but what about the gut sizes?

And where are models for the womens' singlets?

Unless youve got an especially big tummy you should be right with going off the chest sizes.

If your worried bout it lemme know your gut size and I'll go from that. :)

Oh and the modeling of the womens singlets, I didnt think Richo was hot enuff so he only got the guys stuff to show off. ;)

Well........I suppose my gut's not much bigger than 1shots.......sooo.....

admin

  • Guest
Re: DUDEWORLD T's
« Reply #7 on: February 21, 2007, 10:01:47 PM »

Chef (my mate) is 6'2" and 145 kgs ... fucken big bloke!!

I'll try to get hip-shoulder measurements next time i see him (might be a few weeks as we're on opposite shifts)

Cheers!

GL0Be

  • Guest
Re: DUDEWORLD T's
« Reply #8 on: February 21, 2007, 10:41:53 PM »
I would order a couple of tops, but Im wondering, would it be possible to have the knuckle duster removed from the back?




LogicprObe

  • Guest
Re: DUDEWORLD T's
« Reply #9 on: February 22, 2007, 07:33:05 AM »
I'm just getting the front only GlObe........once I figure out what size to order.

Whiteglove

  • Guest
Re: DUDEWORLD T's
« Reply #10 on: February 22, 2007, 08:00:35 AM »


I'll PM our order

I'm definitely a custom size - all adult sizes would swim on me but a kids size 12 would probably not not be quite right!!

 :)


Horatio

  • Guest
Re: DUDEWORLD T's
« Reply #11 on: February 22, 2007, 09:28:32 AM »
My order is in via PM.
Nice work  :D
« Last Edit: February 22, 2007, 09:28:58 AM by Horatio »

Whiteglove

  • Guest
Re: DUDEWORLD T's
« Reply #12 on: February 22, 2007, 12:40:28 PM »
    The easiest way to determine your size:

             Get your most comfortable Tshirt

             Lay it on a flat surface

             With a tape measure or ruler measure the distance across the chest - just below the armholes

             Then double it - this is your chest measurement  - if you are in between sizes it is better to
             get the bigger size as cotton can shrink.

             If length is an issue do the same from shoulder seam to hem (don't double it)

             Sleeve length can be determined the same way.

              :)
                      

Horatio

  • Guest
Re: DUDEWORLD T's
« Reply #13 on: February 22, 2007, 01:16:56 PM »
Quote
...if you are in between sizes it is better to get the bigger size as cotton can shrink...
Cotton... who said anything about cotton? Richo assured me these things were made from the finest drop-bear pelts. Oh well... I suppose cotton will have to do then  :P

Whiteglove

  • Guest
Re: DUDEWORLD T's
« Reply #14 on: February 22, 2007, 01:24:58 PM »


Must have developed a special technique for printing the logo without destroying the pelt!! ;D


Rybags

  • Guest
Re: DUDEWORLD T's
« Reply #15 on: February 22, 2007, 03:25:18 PM »
Bugger.  I'd love one to wear to the American Chopper show on Saturday.


Thing is - I hate long sleeves.  But, I like the look of the flames.

How about a model with short sleeves + flames?

I'm not keen on the 'dusters either.  Just for the fact that it might make you look like a trouble-maker, or some smartarse might take it as an invite for fisties.

Horatio

  • Guest
Re: DUDEWORLD T's
« Reply #16 on: February 22, 2007, 03:43:15 PM »
Quote
Must have developed a special technique for printing the logo without destroying the pelt!! ;D
Ya see, he's led me astray again there. He told me the ink was made from ground 'hoop-snake' fangs so that it blended with the material. Do you think he's been having me on?



Quote
I'm not keen on the 'dusters either.
This is why we had the 10 page discussion in Bartertown. Did ya miss that lil' thread mate? I think you shall now be known as 'Marble Eyes' ;)
« Last Edit: February 22, 2007, 03:46:22 PM by Horatio »

Lancer

  • Guest
Re: DUDEWORLD T's
« Reply #17 on: February 22, 2007, 03:48:48 PM »
Quote
Quote
Must have developed a special technique for printing the logo without destroying the pelt!! ;D
Ya see, he's led me astray again there. He told me the ink was made from ground 'hoop-snake' fangs so that it blended with the material. Do you think he's been having me on?



Quote
I'm not keen on the 'dusters either.
This is why we had the 10 page discussion in Bartertown. Did ya miss that lil' thread mate? I think you shall now be known as 'Marble Eyes' ;)


Just like setting the Ma-deuce to "night" so only the tracer ones go off...
« Last Edit: February 22, 2007, 03:49:18 PM by Lancer »

3ncryptd

  • Guest
Re: DUDEWORLD T's
« Reply #18 on: February 22, 2007, 05:10:13 PM »
Quote
I would order a couple of tops, but Im wondering, would it be possible to have the knuckle duster removed from the back?

Quote
Bugger.  I'd love one to wear to the American Chopper show on Saturday.

Thing is - I hate long sleeves.  But, I like the look of the flames.

How about a model with short sleeves + flames?

I'm not keen on the 'dusters either.  Just for the fact that it might make you look like a trouble-maker, or some smartarse might take it as an invite for fisties.


Sorry fella's, the dusters gotta stay, the back is all on 1 screen. But who knows what future designs will be done, maybe one without dusters and a short sleeve with flames. :)

blackf1ng3r

  • Guest
Re: DUDEWORLD T's
« Reply #19 on: February 22, 2007, 05:13:29 PM »

         Spewin'... :-/
« Last Edit: February 22, 2007, 05:13:45 PM by blackf1ng3r »

3ncryptd

  • Guest
Re: DUDEWORLD T's
« Reply #20 on: February 22, 2007, 05:41:09 PM »
Due to a seemingly popular demand I'll be giving the printer a call tomorrow and see if I can work out something with him in regards to a back print less the dusters. Providing Richo doesnt mind that is. :)

I'll let y'all know how it goes. Hopefully I can get a version without the dusters. I'll see what the printer can do.

Hows that sound folks? :)


Lancer

  • Guest
Re: DUDEWORLD T's
« Reply #21 on: February 22, 2007, 05:57:43 PM »
sounds excellent

Depending on the way the screens were made...

I've seen duct tape used to block sections at times (uncle was a screen printer for years and made his own screens)

blackf1ng3r

  • Guest
Re: DUDEWORLD T's
« Reply #22 on: February 22, 2007, 06:06:56 PM »



     Soz 3 - confusion reigned for a while there.

     Wanted the backs of mine without any printing at all - thort I read that a back print was mandatory

     All good.    :)

blackf1ng3r

  • Guest
Re: DUDEWORLD T's
« Reply #23 on: February 22, 2007, 06:13:58 PM »


       ...which reminds me - a vote of thanks is in order for the magnificent job you and your crew have done in getting this thing home, all the while accomodating a huge range of individual requirements.

   / hands 3 a double Galanian     :-*


Cheers, mate.

3ncryptd

  • Guest
Re: DUDEWORLD T's
« Reply #24 on: February 22, 2007, 07:16:14 PM »
 Depending on the way the screens were made...

Hopefully a nice and easy to mod way. :)

hands 3 a double Galanian

Cheers blackf1nger. Im happy doing it, all for a worthy place and peeps. :)

I aim to please, or atleast I'll kinda try. ;)